Please go to our new website at SVSPOWER.COM   SVSi Viper Performance Upgrade System SVSi Stryker 700 K&N Air Filter 3" Carbon Fiber Induction Box 3" Tubes and Hoses -Throttle Bodies 1.7 Rockerarms & 4130 Pushrods Hi-Performance SS Headers (Purge welded with Burns 5 in 1 Collector) Hi-Performance SS Exhaust (Cat Exchange) Competition Short Shifter with MGW Shift Knob 3.54 Ring & Pinion Specmo Recalibration Box Hi-Performance Spark Plug Wires Cylinder Heads: Race proven intake and exhaust port design Beryllium intake and exhaust valve seats Hand-fit bronze valve guides Custom size stainless intake and exhaust valves Hardened steel spring cups Lightweight titanium 7deg valve spring retainers Hardened steel 7deg valve locks Durable one piece Teflon valve seals Performance double coil valve springs  Engine Block: Blueprinting operations are implemented using state of the art equipment Block decks are squared to crankshaft centerline Main bearing housings are align-honed to ensure concentricity and size Cylinder bores are deck-plate honed to fit individual piston size Crankshaft is hand de-burred and oil holes are chamfered for improved oiling Connecting rods are rebuilt to a tolerance of +/- .0002 inches Rotating / reciprocating assembly is balanced to within .2 ounce/inches ARP hardware is used throughout to enhance bottom end reliability Cam Upgrade  Fuel System: SVSi custom fuel system Motec Fuel Management with Wiring Interface       Installed*  (All Years)   For questions or to set up an installation, contact: 27W340 St. Charles Rd. West Chicago, Illinois 60185 Phone:  630-876-1335 Fax:      630-876-1336